HOTLINE MON.-FRI. 8:00-16:00
HOTLINE MON.-FRI. 8:00-16:00
Catchshift – the latest solutions for lifting heavy plates.
Showing 1–12 of 13 results
Faster laying of concrete slabs, less worker fatigue, and time savings on the construction site. MICKEY 155, MICKEY 255, and the battery-powered E-MICKEY 255 are vacuum lifters designed for everyday paving work.
WOLF 4000 is a vacuum lifter for road slabs, concrete mats, platform slabs, and prefabricated elements with a mass of up to 4000 kg.
The device allows for faster and safer lifting, transporting, and laying of heavy concrete elements without slings, hooks, or the risk of edge damage. The suction cup lifts the slab in about 1 second, and releasing it from above leaves the side edges of the material free, which facilitates precise element placement.
WOLF 4000 proves useful in the construction of temporary roads, squares, parking lots, platform slabs, and ramps, as well as in the production and assembly of heavy concrete prefabricated elements.
Ensures lifting capacity of up to 4,000 kg and a secure grip in 1 second, which speeds up assembly time, reduces damage, and requires fewer people.
lifting, rotating by 180°, and precisely positioning concrete precast elements with a mass from 1.5 to 5 tons.
The device proves useful with precast elements lacking transport handles, holes, or suspension points. It allows working with slabs, blocks, and elements with irregular geometry, where classic slings or straps slow down installation or increase the risk of damaging the precast element.
MONKEY can be matched to a specific element, its mass, surface, and method of operation, which is why it works well both in precast plants and on infrastructure construction sites.
TROLLY500 is an electric self-propelled cart for installing concrete, stone, and prefabricated elements with a mass of up to 500 kg.
Combined with a Mickey or E-Mickey vacuum lifter, it allows a single operator to pick up slabs from a pallet, transport them, and precisely lay them at the installation site. It proves especially useful in paving, landscaping work, and the installation of heavy elements, where it speeds up work pace and reduces strain on workers.
FROG is a vacuum lifter for concrete slabs, kerbs, and prefabricated elements with a mass of up to 600 kg. It was designed for precise laying of heavy elements, especially where aesthetics, load control, and free access to the side edges matter.
The vacuum lifter works from above, so there’s no need to use straps, hooks, or side clamps around the element. Thanks to this, slabs can be laid precisely next to each other, without risking edge damage during lifting.
The FROG series includes three configurations: FROG 600, FROG 600 MINI, and FROG TOWER for more demanding, permeable materials.
BEAR 6000 is an industrial vacuum lifter for lifting, moving, and installing concrete precast elements with a mass of up to 6000 kg.
The device works together with cranes, gantry cranes, telescopic loaders, and forklifts. It proves useful where a stable grip from above, precise element positioning, and a repeatable working process are needed.
BEAR 6000 is not a ready-made universal set. The device’s configuration, number of suction cups, beam type, and carrier adaptation method are selected based on the actual elements the client works with.
SNAKE is a vacuum suction cup for pulling out individual paving cobblestones and concrete slabs. It was designed as a practical tool for paving companies, maintenance companies, and service crews.
The device allows you to remove a selected element without levering it up, without disturbing neighboring cobblestones, and without dismantling a larger section of surface. Thanks to this, the repair is faster, more precise, and less risky for the finished surface.
One person is enough to operate it, and the device itself is lightweight, handy, and ready to work within moments.
E-TURTLE is a compact, battery-powered vacuum lifter for lifting, carrying, and laying smooth elements weighing up to 255 kg.
The device works well with ceramic, concrete, paving, and terrace slabs, as well as prefabricated elements with a non-porous, airtight surface. It can be used manually by two people or with a lift, crane, or TROLLY500 cart, where only one operator is needed.
E-TURTLE was designed for everyday construction work, renovations, paving jobs, and the installation of terraces and garden elements.
The trailer provides convenient transport of mini excavators, excavators, or machinery without setting up ramps. The two-axle trailer CS by Lorries was designed with companies in mind that regularly transport mini crawler excavators, small excavators, and compact construction machines. The hydraulically lowering platform makes loading and unloading easier, and the lightweight aluminum construction allows maintaining a high payload capacity with a 3500 kg DMC.
The drilling suction cup enables stable attachment of a drill rig base to concrete, tiles, or stone without the need to drill mounting holes or damage the surface.
A practical solution for crews who drill holes in finished walls, steps, staircases, tiles, or stone elements and don’t want to damage the surface.
The 6 kW hydraulic generator allows you to power power tools and construction equipment using a classic combustion generator’s energy, without needing additional fuel or searching for a power source on the construction site.
All you need is a machine with a hydraulic outlet — an excavator, telescopic loader, forklift, or other carrier — to have access to 230 V power exactly where you’re currently working.
The generator can be mounted on the forks or hung on the hook, which makes it useful on construction sites, during hall assembly, road works, paving jobs, and anywhere access to the electrical grid is limited.
OCTOPOD 800 is a battery-powered vacuum lifter designed for working with stone elements: slabs, countertops, facades, made from natural stone and conglomerates. The device is used both in stone fabrication shops and manufacturing plants, as well as during stone installation on construction sites.